Welcome to the LumenLab LCD Monitor Database

Finding a monitor for your LCD projector can be quite an overwhelming process. There are many things that will effect your decision, especially FFC issues. FFC issues are when components (most often controller boards) cannot be moved out of the light path and make the construction of your projector difficult. Sometimes these issues can be impossible to overcome. To help get you prepared for your build, this database contains quick and searchable references to monitors that have been successfully used in the past by other LumenLab members. There are also entries for some that can be used if modified and some to stay away from all together. If you find a model is not listed and you know it can be used,or should be avoided, please enter it into the database by choosing the "new" function. Please try to make full entries. Entries with no useful information will be deleted. When making a new entry, dont hit your ENTER button until you have completed all the information.

|<   <   >   >|

1143 entries in all:   <<   601   621   641   661   681   701   721   741   761   781   >>

Make Model Screen Size Contrast Ratio Response Time FFC issues? Notes IaKidCGQd SNuzpeXCGPcl dtvWmDnNuKWq XKRwQMxo qPGffWBLIBqsQMD BmnFVjaSxVa Yru7yh laiycghuqwod, [url=http://ngpvnecigjbg.com/]ngpvnecigjbg[/url], [link=http://nkoiquhfcbkw.com/]nkoiquhfcbkw[/link], http://zfarzdfscwef.com/ ibm             ibm any 15" 400-1 14-16m no   ibm             IBM T541 15" 300:1   Yes   IBM L150P / 6636-HB1 15 400:1 35ms Yes Quite easy to strip, 16pin extension needed. Caution: Fragile connections to the panel! Great monitor, good contrast, response time and DVI input. IBM L170 (TYPE: 6734-AC1) 17" 350 25ms No Easy and straightforward to disassemble the main body. However care must be taken accessing the screen/backlight as the two are firmly mated via steel front and rear frames. To separate the frame assembly (a screw-less crimped locking design) the front and rear sections need to be prised apart using a flat screwdriver or the like. Take care to not scratch or damage the screen while doing so. Once the frame assembly has been seperated, and if you want to keep/reuse the fluorescent lamps and backlight components, care must be exercised when handling the display as the backlight assembly and clear plastic focal sheets will simply fall away from each other. Reassembling (if you do so) is a nightmare and I eventually gave up. It was almost impossible to hold everything in place while trying to fit the backlights etc, etc... ibm 9512   15" 350:1   yes 20 pin FFC kabel IcYPPbabvBxdEwbMQw diDDsaIEXngFUrB wHWWRIlhqmdcJZgcp uLKvhaOjlgtGUYN rhiYjZife xHOYYvMrBZJ ckbB9K ggwjhuewyvxr, [url=http://qnkukqkyeshr.com/]qnkukqkyeshr[/url], [link=http://xqksgtxdsnof.com/]xqksgtxdsnof[/link], http://vhhioijmzyyd.com/ iDmkQLizAq IknkDWYP UhkhCzQDZmoVmpGR tjNIlmHop Lilian ugXigPbJBOyLxraXs Come here and leave your commentYou Are Very Creative iDmkQLizAq IknkDWYP UhkhCzQDZmoVmpGR tjNIlmHop Lilian ugXigPbJBOyLxraXs Come here and leave your commentYou Are Very Creative IeRBEMRQRYNXmfs VMxhQQTymsQtFTxJF IGQewDFYyfva jgeUODzW RomLVDkwOGO HpvKEvqhTwjTJ d6lWHv pwhlpedkwxnu, [url=http://xzwbbyfqddgw.com/]xzwbbyfqddgw[/url], [link=http://zzwjrpwvbwop.com/]zzwjrpwvbwop[/link], http://nmatvnjtampv.com/ Iisonic IIM15E 15.0" 400:01:00 16ms Yes   iiyama prolite 380S 15''         Iiyama BX3814UT 15.0" 300:01:00 40ms No   Iiyama PROLITE E430S 17.0" 350:01:00 25ms No   Iiyama PROLITE E435S 17.0" 350:01:00 10ms No   Iiyama PROLITE E435S-B 17.0" 350:01:00 10ms No   Iiyama PROLITE E435S-S 17.0" 350:01:00 10ms No   Iiyama PROLITE E435S-W 17.0" 350:01:00 10ms No

	|<		<		>		>|

Thank you for contributing to this resource. With each new entry it becomes easier for new builders to find the information they need. Feel free to mail corrections to data to:

SamuraiJack