Welcome to the LumenLab LCD Monitor Database

Finding a monitor for your LCD projector can be quite an overwhelming process. There are many things that will effect your decision, especially FFC issues. FFC issues are when components (most often controller boards) cannot be moved out of the light path and make the construction of your projector difficult. Sometimes these issues can be impossible to overcome. To help get you prepared for your build, this database contains quick and searchable references to monitors that have been successfully used in the past by other LumenLab members. There are also entries for some that can be used if modified and some to stay away from all together. If you find a model is not listed and you know it can be used,or should be avoided, please enter it into the database by choosing the "new" function. Please try to make full entries. Entries with no useful information will be deleted. When making a new entry, dont hit your ENTER button until you have completed all the information.

|<   <   >   >|

1143 entries in all:   <<   601   621   641   661   681   701   721   741   761   781   >>

Make Model Screen Size Contrast Ratio Response Time FFC issues? Notes lg   17     no   Lg   17         LG Flatron L1530 15.0" 400:01:00 16 ms OK   LG Flatron L1550s 15.0" 450:01:00 16 ms OK   LG LG 560 15.0" 300:01:00 25ms Yes   LG 563 LE 15.0" 250:01:00 25ms Yes   LG FLATRON 577LH 15.0" 200:01:00 45ms No   LG FLATRON L1510H 15.0" 400:01:00 25ms No   LG FLATRON L1510M 15.0" 350:01:00 30ms No   LG FLATRON L1510S 15.0" 300:01:00 25ms No   LG FLATRON L1511S 15.0" 300:01:00 25ms No   LG FLATRON L1530 15.0" 400:01:00 16ms No   LG L17185 17" 700:1 8ms No Very easy, non-destructive disassembly (most things just clip apart). 1280x1024 resolution, very good colour rendering and contrast. Controller board flips off LCD easily - no FFC issues. Relatively cheap ($200). LG 1750 SQ 17" 450:1 ? none. User reports a very easy strip. No FFC issues. LG MS575 15"     Yes components cannot be moved out of the light path and make the construction difficult. impossible to overcome. LG L1752TX 17" 1400 -700 real 8ms none Nice color and contrast Easy strip only has FFC on the bottom none on the sides. Water worked on the antiglare in three hours. Might be the same as the L1718S LG L1530S 15" 400:1 16ms No Was my first monitor to strip and found it very easy , just about 15min work. LG L1719S 17 1400:1 8ms none everything just comes apart with clips and tabs, one ffc, but it's not a problem. cheap screen and incredible stats, go for it LG L194WT 19"ws 2000:1-800 native 5ms GtG none VGA and DVI input that supports HDCP Strips Very easily 9 screws all in all ok picture quality if used in a celing mounted front projection setup theres some light bleed on the bottom of the lcd that can be corrected by rotating the lcd 180 degrees or tilting the lcd in a way that will not work for a celing mounted setup. I would suggest using this panel only for a floor mounted or rear screen theater. LG

	|<		<		>		>|

Thank you for contributing to this resource. With each new entry it becomes easier for new builders to find the information they need. Feel free to mail corrections to data to:

SamuraiJack