Welcome to the LumenLab LCD Monitor Database

Finding a monitor for your LCD projector can be quite an overwhelming process. There are many things that will effect your decision, especially FFC issues. FFC issues are when components (most often controller boards) cannot be moved out of the light path and make the construction of your projector difficult. Sometimes these issues can be impossible to overcome. To help get you prepared for your build, this database contains quick and searchable references to monitors that have been successfully used in the past by other LumenLab members. There are also entries for some that can be used if modified and some to stay away from all together. If you find a model is not listed and you know it can be used,or should be avoided, please enter it into the database by choosing the "new" function. Please try to make full entries. Entries with no useful information will be deleted. When making a new entry, dont hit your ENTER button until you have completed all the information.

|<   <   >   >|

1143 entries in all:   <<   601   621   641   661   681   701   721   741   761   781   >>

Make Model Screen Size Contrast Ratio Response Time FFC issues? Notes Maxdata BELINEA 101535 15.0" 350:01:00 40ms No   Maxdata BELINEA 101536 15.0" 350:01:00 27ms No   Maxdata BELINEA 101570 15.0" 450:01:00 25ms No   Maxdata Belinea 101570 15 400       Maxdata Belinea 101570 15 400:1 25 YES Short L-type: http://www.tech-blog.pl/pliki/tasiemka_101570.jpg medion             medion             Medion MD5042 OC           Metro M 15S 15.0" 450:01:00 16 ms OK   Miracle Business, Sysonic LTS09B or W 800 x 600 300:1 25ms None Very comparable to HAMI 8.4" without FFC issues. No remote. True 15pin VGA input. Easy Strip. mishubishi   15         mitac             mitac lc552 15"     yes I was unable to remove circuits from light path Mitsubishi LXA550W 15.0" 400:01:00   No   Mitsubishi DV177 17" 700:1 8ms No VGA and DVI inputs. Mine used Samsung LTM170EX-L21 LCD Panel. http://www.mitsubishielectric.com.au/PRODUCTS/COMPP/TFT/DV177.htm Mitsubishi DV150JB 15   16ms Yes   Mitsubishi V50LCD 15     YES 90 degree FFC is too short to get PCB out of the way. One side of FFC is soldered down so you would need socket plus extension. MnsodXzqGctmKTaYw LDPdGdfbgpgWgt DKiMJBtWpeDo UNFroPmr ground turkey burger recipes tJZHAnoCMYdGJkYZoo Might Be The Best Ever Yet MultiQ MQ122E 12" ? ? YES 800x600 Controlercard is connected to the lcd/tft on both bottom and right side with short thin cabels. It is difficult to make them longer. Multisync

	|<		<		>		>|

Thank you for contributing to this resource. With each new entry it becomes easier for new builders to find the information they need. Feel free to mail corrections to data to:

SamuraiJack