| | Make | Model | Screen Size | Contrast Ratio | Response Time | FFC issues? | Notes | | ViewMagic | 121TSA | 12.1 | | | None | I don't know the contrast ratio or the response time, I haven't turned mine on yet but max res. is 800x600 and NO FFC issues at all. It's a wire(cable), not a FFC. Looks like a great lcd to use. |
| viewsonic | ve500 | 15 | 400;1 | | Yes | 18pin .5mmpitch, ffc --easy to strip controlbuttons extend long for any mount,didn't do ag removal yet--LCD Panel Type 15" color TFT active matrix XGA LCD
Display Area 12.0" (horizontal) x 9.0" (vertical); 15.0" diagonal
Optimum Resolution 1024x768
Contrast Ratio 400:1 (typ)
Viewing Angle 120° (horizontal), 110° (vertical)
Response Time 16ms (typ)
Brightness 250 cd/m2 (typ)
Light Source Long life, 50,000 hrs. (typ)
Panel Surface Anti-glare
POWER Voltage 100-240V AC (auto switch), 50-60Hz (+/-3) Hz
Consumption 30W (typ)
COMPATIBILITY PC IBM compatible from VGA up to 1024x768 non-interlaced
Mac®* Power Mac™ G3/G4 up to 1024x768
CONNECTOR Analog 15-pin mini D-sub (detached)
Power DC In, DC to Head
CONTROLS Basic Power (soft), 1, down, up, 2
OnView® Auto image adjust, contrast, brightness input select, auto adjust (volume, mute), ViewMatch® color adjust (SRGB, 9300K, 6500K-default, 5400K, 5000K, user color), information (mode, model number, serial number), manual image adjust (H. size, H. position, V. position, fine tune, sharpness), setup menu (language, resolution notice, OSD position, OSD timeout), memory recall
DIMENSIONS
(WxHxD) Physical 356mm x 326mm x 191mm
(14.0" x 12.8" x 7.5")
OPERATING CONDITIONS Temperature 32-104°F (0-40°C)
Humidity 10–90% (non-condensing)
WEIGHT Net 7.7 lbs (3.5 kgs.)
Gross 12.5lbs. (5.7 kgs.)
REGULATIONS UL, cUL, FCC-B, CB, CE, IC-B, EPA, NOM,TUV/GS, VCCI, BSMI, PSB (S-MARK), C-Tick, GOST-R (PCT-BZ02), PCSC (B-MARK), EMI/B, MPRII, SEMKO, DEMKO, FIMKO, NEMKO, TCO'99, ISO13046-2, ENERGY
POWER MANAGEMENT Meets TCO'99 and ENERGY standards
INPUT SIGNAL Sync H/V separated (TTL)
Analog RGB Analog (75 ohms, 0.7/1.0 Vp-p)
Frequency Fh: 30-62kHz; fv: 50-75Hz |
| viewsonic | | | | | | |
| viewsonic | VA721 | 17" | 400:1 | 8ms | no | check "Fulcrum" member for teardown step by step |
| viewsonic | | | | | | |
| viewsonic | VE150mb | 15 | | | yes | other user is a liar, 20 pin 90 degree ffc issue |
| viewsonic | | | | | | |
| viewsonic | va720 | | | | | |
| viewsonic | | | | | | |
| Viewsonic | VE150 | 15.0" | 350:01:00 | 30ms | No | |
| Viewsonic | VG150 | 15.0" | 350:01:00 | 30ms | No | |
| Viewsonic | VG500 | 15.0" | 400:01:00 | 30ms | Yes | |
| Viewsonic | VA503b | 15" | | | Yes | Avoid. I tried an FFC extension, but it did not work out. Also, solder connections easily easily broke. |
| Viewsonic | VPA150 | 15" | 300:1 | | Yes | Because you can rotate the screen to portrate layout it has an extra board to worry about. Also it requires an FFC extension |
| Viewsonic | VX900 | 19" | 600:1 | 25 | Yes | The FFC cable is realitively brittle on this model, so using it is ill-advised. It is possible to use a 20-pin FFC extension. |
| Viewsonic | VA800 | 17.4in | 400:1 | | Yes | 1280x1024 resolution, two switchable VGA inputs.
Two problematic FFC connectors, one ~2 inches long and one ~1.5 inches long.
Anti-glare coating. |
| Viewsonic | 710b | 17`` | 500:1 | 8ms | yes/no | Realy great monitor, quite easy to strip but has one ffc problem in left bottom corner 16pin, 0,8mm , probably can be bought... sry 4 english |
| Viewsonic | VX2235 | 22" | | | None. | A perfect isolated LCD matrix available without any FFC issues. And solid build quality. |
| Viewsonic | VE510S | 1024x768 | 400:1 | 16 | yes | The matrix has a horizontal and vertical controller board. They are connected by 8 millimeter too short 10-pin ribbon cable. It is very difficult to lengthen. |
| Viewsonic | ve510s | 15 | 400 | 16 | yes | |
|
|
