| Make | Model | Screen Size | Contrast Ratio | Response Time | FFC issues? | Notes |
| compaq | 1720 | 17 | 400:1 | 8ms | no | BenQ boards and Genesis gm5120 controller (EPROM SOCKETED!) with about a 7" twisted pair bundle from controller to LCD driver. Nice!! Actual LCD driver is on flex-pcb but only attached to the glass' horizontal axis - no FFC or vertical flex-pcb.
DVI and analog input. Only downside I can see is that the power supply board is shared with the inverter and has a header connect to the controller board. Not an issue, but I usually like to strip out the inverter board altogether.
Altogether, a nice easy strip and a good screen. |
| compaq | | 15 | | | | |
| compaq | | | | | | |
| compaq | | | | | | |
| Compaq | TFT5010 | 15" | 200:1 | 30 | Yes | A minimum of 20 Pin extention will be required, you may wish to extend the other 2 50 Pins, Stripping No prob |
| Compaq | TFT5005m | 15" | | | YES | Control board cannot be moved out of light path. |
| Compaq | 1701 | 17 | 350:1 | 25 | yes | Needs one 20 pin extension. No DVI, only VGA.
1280 x 1024 @ 75 Hz
On: 40W max
StandBy: 3W max. |
| Compaq | TFT5015 | 15 | | | No | Easy to strip. Wide bezel monitor, circuit boards are around screen instead of folded behind. |
| Compaq | FT 5005 | | | | | |
| Compaq | TFT5015 | 15" | 300:1/200:1 | 45 ms (typical) | Yes | For some reason someone has submitted that there are no FFC issues with the monitor, I just bought one on this premise and was in for a surprise.
It can still be used but you will need some extension cables.
08/04/2008 |
| Compaq | | | | | | |
| Compaq | | | | | | |
| Compaq | 1520 | 15" | | | No | Easy disassembly. Build-in backlight timer. |
| COMPAQ | TFT5015 | 15 | 350:1 | | | |
| Compaq (HP) | 1720 | 17 | 400:1 | 8ms | no | BenQ boards and Genesis gm5120 controller (EPROM SOCKETED!) with about a 7" twisted pair bundle from controller to LCD driver. Nice!! Actual LCD driver is on flex-pcb but only attached to the glass' horizontal axis - no FFC or vertical flex-pcb.
DVI and analog input. Only downside I can see is that the power supply board is shared with the inverter and has a header connect to the controller board. Not an issue, but I usually like to strip out the inverter board altogether.
Altogether, a nice easy strip and a good screen. |
| cornea | | | | | | |
| Cornea Systems | MP503 | 15.0" | 300:01:00 | 25ms | No | |
| CornPClGxlgAA | doDQtsLaFceLMdGiEw | HnuuNTzQiwyNNSxoi | RuEgLdyQsO | car fe mexico new santa used | XrPoOpVCTRxoUqgRrZ | Can You Look At THis?I think This Is One Of My Favorites, car fe mexico new santa used, :DD, four seasons santa barbara ca, rcaq, |
| CTX | PANOVIEW 520 | 15.0" | 350:01:00 | 30ms | No | |
| CTX | PANOVIEW 530 | 9.5" | 100:01:00 | | No | |
